How to maintain a watch display stand

Everyone knows that everything needs maintenance, and display stands are no exception. We often clean and maintain display stands to keep them shiny. However, you may not know that some wrong cleaning and maintenance methods, although they can temporarily make the display stand clean, actually cause potential damage to the display stand, and your display stand will have irreparable problems, which will be counterproductive. Here are some problems that are easy to occur in the maintenance of display stands and how to avoid them, hoping to help consumers.
The rag must be clean
When cleaning and maintaining the display stand, you must first make sure that the rag used is clean. After cleaning or wiping off the dust, be sure to turn it over or change to a clean rag before using it. Don't be lazy and reuse the dirty side again and again, which will only cause the dirt to rub repeatedly on the surface of the commercial furniture, which will damage the bright surface of the display stand.
Care agent selection
To maintain the original brightness of the display stand, there are currently two types of display stand maintenance products: display stand care spray wax and cleaning and maintenance agent. The former is mainly for display racks made of various materials such as wood, polyester, paint, and fireproof plastic board, and has two different fresh scents of jasmine and lemon. The latter is suitable for various solid wood display racks such as wood, glass, synthetic wood or melamine board, especially for display racks made of mixed materials. Therefore, if you can use maintenance products that have both cleaning and care effects, you can save a lot of precious time.
Before using the care spray wax and cleaning and maintenance agent, it is best to shake them well first, then hold the spray can straight at a 45-degree angle so that the liquid components in the can can be completely released without losing pressure. Then gently spray it on a dry rag at a distance of about 15 cm, and then wipe the commercial furniture in this way, which can achieve a good cleaning and maintenance effect. In addition, remember to wash and dry the rag after use. As for display racks with fabric materials, such as fabric sofas and leisure cushions, you can use cleaning and maintenance agents for cleaning carpets. When using, first use a vacuum cleaner to remove the dust, and then spray a small amount of carpet cleaner on a wet cloth and wipe it.
Removing paint watermarks
A wet teacup on a painted table often leaves a circle of annoying watermarks. How can you quickly remove them? You can place a clean wet cloth on the watermark on the table, and then use an iron on it at a low temperature, so that the moisture that has penetrated into the paint film can evaporate, making the watermark disappear. However, when using this method, the rag used should not be too thin, and the temperature of the iron should not be adjusted too high. Otherwise, the watermark on the table will disappear, but the brand will never be removed.